BMB Zada Pro is a stand-alone 2-filter 5-stage Ultrafiltration system. The system comes standard with a luxury faucet and installation kit. The system is one of the only Ultrafiltration systems in the world that also helps with scale formation. The system incorporates a state of the art filters, easy Plug & Play components and Quick Change Filter Technology (QCFT) for low-cost maintenance.
First Filter:
The purpose of the first filter is to remove and kill microorganisms, filter particles down to 0.2-micron, remove common heavy metals found in tap water such as lead, mercury, iron and manganese. Remove chlorine and other chemicals that cause bad taste and odour.
The first stage of the system is a 1-micron filter which is infused with zinc nanoparticles that activate in the water for antibacterial properties. This stage has a microorganism kill rate of more than 99% while filtering sediment, dust and particles that are greater than 1-micron size.
The second stage of the system is activated coconut shell carbon powder with one of the highest surface area capacities in the world (1 x 1015 m2). This tremendous capacity allows for 99.9999% absorption and removal chemicals such as chlorine, benzene, radon, solvents trihalomethane compounds, volatile organic chemicals (such as pesticides and herbicides) and hundreds of other man-made chemicals that are regularly found in tap water.
The third stage of the system is a 0.5-micron filter which is also infused with zinc nanoparticles that activate in the water for antibacterial properties. This stage also has a microorganism kill rate of more than 99% while filtering sediment, dust, particles that are greater than 0.5-micron and heavy metals such as chromium, lead, mercury and cadmium.
The fourth stage is an Ultrafiltration (UF) element that is composed of 0.2-micron hollow fibre strains. The UF element will remove 99.99% of bacteria, particles down to microscopic size, heavy metals such as Iron and manganese along with hundreds of other compounds that are regularly found in tap water.
Second Filter:
The purpose of the second filter is to remove temporary hardness that often causes bad taste and scale formation.
The fifth stage is a specially designed resin that will remove only the temporary hardness (scale forming and bad tasting minerals) such as calcium carbonate and magnesium carbonate while keeping the good tasting minerals such as Calcium (Ca+2) and Magnesium (Mg+2).
--
BMB Zada Pro is designed for use in residential under the counter and commercial drinking water applications such as cafes where the mineral content of the water is very important for the best-tasting espressos.
The first filter has 18 - 24 months of lifetime for residential use and 6 - 12 months for commercial use. The second filter has 4 - 6 months lifetime for residential use and 1 - 3 months of lifetime for commercial use.
Avoid drilling another hole for the filter tap by choosing one of our 3 way taps! You are sure to find the perfect tap to compliment your kitchen.
Technical Specifications |
|
System Capacity |
240 Litres / Hour @ 3 Bar |
Incoming Hardness |
35 oF Max. |
Incoming TDS |
600 PPM Max. |
Incoming Temperature |
10 - 30 oC |
Incoming Pressure |
2 Bar Min. 6 Bar Max. |
System Dimensions |
(L) 230mm x (W) 130mm x (H) 370mm |
System Weight |
2.7 kg |
Please note:
The blank fittings may have arrived damaged (illustrated below). These are to be removed and disposed as they are installed to protect the inlet and outlet of the system. It is not an issue if it has arrived damaged.
Downloads:
BMB Zada Pro Installation Manual (also applies to the BMB Zada)