BMB Zada Pro is a stand-alone 2-filter 7-stage Ultrafiltration system. The system is one of the only Ultrafiltration systems in the world that also removes scale. The system incorporates a state of the art filters, easy Plug & Play components and Quick Change Filter Technology (QCFT) for low-cost maintenance.
The purpose of the first filter is to remove and kill microorganisms, filter particles down to 0.2-micron, remove common heavy metals found in tap water such as lead, mercury, iron and manganese. Remove chlorine and other chemicals that cause bad taste and odour. We advise replacing this filter every 18 - 24 months (residential use).
The first stage of the system is a 1-micron filter which is infused with zinc nanoparticles that activate in the water for antibacterial properties. This stage has a microorganism kill rate of more than 99% while filtering sediment, dust and particles that are greater than 1-micron size.
The second stage of the system is activated coconut shell carbon powder with one of the highest surface area capacities in the world (1 x 1015 m2). This tremendous capacity allows for 99.9999% absorption and removal chemicals such as chlorine, benzene, radon, solvents trihalomethane compounds, volatile organic chemicals (such as pesticides and herbicides) and hundreds of other man-made chemicals that are regularly found in tap water.
The third stage of the system is a 0.5-micron filter which is also infused with zinc nanoparticles that activate in the water for antibacterial properties. This stage also has a microorganism kill rate of more than 99% while filtering sediment, dust, particles that are greater than 0.5-micron and heavy metals such as chromium, lead, mercury and cadmium.
The fourth stage is an Ultrafiltration (UF) element that is composed of 0.2-micron hollow fiber strains. The UF element will remove 99.99% of bacteria, particles down to microscopic size, heavy metals such as Iron and manganese along with hundreds of other compounds that are regularly found in tap water.
The purpose of the second filter is to remove temporary hardness that often causes bad taste and scale formation, add great tasting minerals back into the water that does not form scale, increase the water pH to above 7.5 to produce alkaline water, further remove chlorine and other chemicals that cause bad taste and odour and act as a final polishing filter. We advise replacing this filter every 4 - 6 months (residential use).
The fifth stage is a specially designed resin that will remove only the temporary hardness (scale forming and bad tasting minerals) such as calcium carbonate and magnesium carbonate while keeping the good tasting minerals such as Calcium (Ca+2) and Magnesium (Mg+2).
The sixth stage of the system is granule activated coconut shell carbon This filter will further remove chemicals such as chlorine, benzene, radon, solvents trihalomethane compounds, volatile organic chemicals (such as pesticides and herbicides) and act as a final polishing filter.
The seventh stage is made up entirely of Calcite mineral. This mineral will add more of the great tasting Ca+2 and Mg+2 minerals back into the water to not only produce great taste, great coffee but also give the water alkaline properties with a pH of 7.5 or greater.
BMB Zada Pro is designed for use in residential under the counter and commercial drinking water applications such as cafes where the mineral content of the water is very important for the best-tasting espressos.
The system is installed under the counter with a secondary faucet installed on the sink. The 3" x 14" larger filter sizes have one of the longest lifetimes in industry. The first filter has 18 - 24 months of lifetime for residential use and 6 - 12 months for commercial use. The second filter has 4 - 6 months lifetime for residential use and 1 - 3 months of lifetime for commercial use.
Zada Pro Installation Manual