Replacement Filter 1 Year Bundle Pack for the Pure-Pro ERS-106A Alkaline RO System
This bundle pack contains 8 filters in total, designed to last at least 1 year.
- Two x (Stage 1) 5 Micron Sediment Filter: recommended change every 6 months
With only five micron rating. It is effective in removing dirt, rust and sand particles.
- Two x (Stage 2) Granular Activated Carbon Filter: recommended change every 6 months
It takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odour, and colour.
Two x (Stage 3) Granular Activated Carbon Filter: recommended change every 6 monthsIt takes out 99% of the chlorine and organic chemicals. It provides enhanced reduction of taste, odour, and colour.
- One x (Stage 5) Post Carbon filter: recommended change every 12 months
This carbon post filter removes objectionable tastes and odours to enhance the quality of your drinking water. We are using NSF approved post carbon to guarantee the taste of water.
- One x (Stage 6) Alkaline Filter: recommended change every 12 months
The Alkaline filter changes the acidic RO water into a perfect Natural Alkali Calcium Ionized Water. The Alkaline filter simply gives back minerals such as ionized calcium, magnesium, sodium, potassium ion, which were taken away while purifying the water.
How does the system work?
The system is remarkably easy to fit and can be installed by any competent person with a spanner and a drill. No plumbing or plumbing skills is required. The system comes complete with a device called a “saddle valve”. This wraps around the cold water pipe which supplies your current cold water tap in your kitchen. You tighten it around the cold water pipe with a spanner. After that, there is a handle you can twist which creates a hole in the cold water pipe and this is what provides the inlet for the water to enter the filtering system. Easy connecting push-fit tubing attaches to the saddle valve which is then quite simply push fitted into the system. As the water travels through the various filters, it then reaches the RO membrane. This filter has very tiny micron pores and only allows very pure water to pass through it. The contaminants which cannot pass are not stored in the system, but rather sent to the drain. The kit comes with a drain saddle, which wraps around the waste pipe under your kitchen sink. It is simply attached with a couple of nuts and bolts and tightened with a spanner. Lastly, there is the dispensing tap. You simply drill a 12mm hole where you want the tap to be located, ensuring you can gain access underneath to tighten the nuts and bolts. The rest is just simply push fitting all the tubing together. It is easier than it sounds and the kit comes with full and clear instructions.
Please note that the colours of the filters may vary, this is totally dependable on stock but they are all the exact same set just with different coloured labels.